Low surface treatment epoxy primer, international paint repair star products, widely used in various steel structure repairs and new surfaces.
The moisture-curing high-build epoxy paint is widely used in the splash zone of bridge steel pipe piles and is widely used in bridges around the world.
Epoxy primers are used in large quantities in new repair steel structures. They can also be attached to lacquers and can be applied to non-carbon steel surfaces as a transition layer.
High film thickness phenolic epoxy primer under the wet and dry alternating zone insulation layer has excellent performance and resistance to chemical resistance.
High solids epoxy iron intermediate paint acts as a shielding in the anti-corrosion system.
Zinc phosphate-containing anti-rust pigments can be used as primers, intermediate paints and top coats, resistant to chemical fumes and chemical spills, and have good abrasion resistance.
High solid epoxy phenolic storage tank lining, with drinking water certificate, oil and partial solvent, thick film anticorrosive coating.
A two-component, solvent-free epoxy phenolic lacquer that acts as a tank lining and is resistant to a variety of chemical media and has an NSF certificate.
Zinc phosphate primer, widely used in new repair steel structures, fast drying, wear resistant, can be applied to equipment with fast handling.
Epoxy glass flake paint with excellent abrasion resistance and corrosion resistance. It can be used as an anti-skid deck in combination with aggregate.
Zinc powder products, containing 55% zinc, have fast drying properties, as an anti-corrosion coating primer
Zinc powder products, containing 50% zinc, have fast drying properties, as an anti-corrosion coating primer
Two-component epoxy zinc-rich product with 65% zinc content and fast drying properties as an anti-corrosion coating primer
Two-component epoxy zinc-rich product with 75% zinc content and fast drying properties as an anti-corrosion coating primer
Two-component epoxy zinc-rich product with 80% zinc content and fast drying properties as an anti-corrosion coating primer
Rapid overcoating, fast drying inorganic zinc silicate primer with a dry film containing 65% zinc.
Two-component inorganic zinc silicate primer, suitable for new steel structure, dry film with 85% zinc content, fast drying performance, as the first choice for anti-corrosion coating primer. Film formation at one time, no overcoating.
The temporary weldable zinc silicate workshop protects the primer and is used on the surface of the steel plate.
Alkyd topcoat, generally used as a maintenance paint on the ship, weather resistance is generally not recommended for outdoor steel structures.
Acrylic topcoat, generally used in marine, suitable for indoor and outdoor steel structure, strong adhesion, strong water resistance, resistant to weak acid and weak base and general mild chemicals.
Epoxy topcoat, high gloss, hard, chemical resistant, poor weatherability, easy to chalk in the sun.
Aliphatic polyurethane topcoat, excellent wear resistance, excellent chemical and oil resistance, strong adhesion, good weather resistance, decorative and rich colors.
Silicone topcoat with excellent gloss and color retention, good abrasion resistance and softness. Excellent durability for extended life.
Polysiloxane finish, outstanding gloss and color retention, good wear resistance and soft. Outstanding durability, can prolong life.
High performance, two-component fluorocarbon topcoat, gloss retention, color retention, abrasion resistance, stronger than polyurethane, self-cleaning.
One-component silicone high temperature paint with temperature resistance up to 540 ° C
Aluminum-containing heat-resistant oil-based high-temperature paint, temperature resistance up to 315 ° C
One-component water-based intumescent fire-retardant coating, suitable for indoor steel structure fireproof, limit refractory burning time of 3 hours, in line with European technical certification ETA-11/0045.
One-component solvent-type intumescent fire-retardant coating with an ultimate fire-resistance time of 2.5 hours, in line with the national standard GB14907-2002
A high-performance anti-corrosive primer with two-component low VOC aqueous inorganic zinc silicate salt. It can withstand high temperature up to 400 ° C. It is suitable for flanged machined surfaces and increases friction coefficient.
Water-based quick-drying epoxy primer with low VOC and excellent wear resistance.
Waterborne polyurethane topcoat for excellent durability and long-term coating.
